6 inch Rewindable Franklin

6 inch Rewindable Franklin
Zoom  Zoom
Our Price:  CALL US: +44(0)1473 462046(Exc. 20% VAT)

6" Rewindable Franklin motor

Specifications:

  • Cable material according to drinking water regulations (KTW approved)
  • Sand slinger and mechanical seal for high performance in sand
  • High efficiency electrical design for low operation cost
  • All motors prefilled and 100% tested
  • Max. storage temperature -15 °C - + 60 °C
  • Design for retrofitable PT100 sensor
  • Approved Franklin Electric Kingsbury Type thrust bearing
  • Non contaminating FES 93 filling
  • Sand fighter® SiC seal system is standard
  • Standard Motors complete 304SS

Technical Specification:

  • 6-inch NEMA flange with Studs (M 12)
  • Protection: IP 68
  • Starts per hour: max. 20
  • Installation position: vertical / horizontal (37 kW motors may not be installed horizontally)
  • Motor Lead in 4m length (KTW approved)
  • Voltage tolerance 50 Hz: +6% / -10%
  • (Standard: 415 + 6% = 440 V, 380 – 10% = 342 V)
  • Voltage tolerance 60 Hz: +/-10%
  • Standard: 460 + 10% = 506 V, 460 –10% = 414 V)
  • Motor protection: Select thermal overloads according to EN 61947-4-1
  • DOL / YΔ - start (pos. of cables 90°)
  • Standard motor with PVC winding insulation (37 kW in standard with PE2/PA insulation) for max. ambient temp. of 30 ºC with a min.cooling flow:
  • 4 kW - 15 kW v = 0,2 m/s
  • 18,5 kW - 37 kW v = 0,5 m/s

Options:

  • Other voltages
  • Motors in complete 316SS and 904 L
  • Motors up to 30kW with PE2/PA winding insulation for max. ambient temp. of 50 °C at the same cooling conditions as standard (37 kW max. 4 5°C)
  • PT 100 temperature sensor (sold separately)
  • Lead in different lengths up to 50 m

Dimensions and Weights:

 

Quote Required? 
Do you have a question about this product?
Please state part number and specifications where applicable.
Email address: *
Phone number: *
Your name: *
Company name: *
Country: *
City: *
 *
Please add the two numbers

Home     
+44(0)1473 462046 |
Search: