ATEX Borehole Pumps - Type P
ATEX Multistage centrifugal electric 4" submersible borehole pumps with technopolymer internals. Suitable for pumped liquids to +30°C and depth of 120m in water without solid particles and in non-aggressive clean water. Also available in all AISI 316 version and version for permanent immersion in hydrocarbons polluted water. Fully customised and bespoke models available on request.
- External pump case, delivery port, suction port, shaft and others components in stainless steel.
- Impellers and diffusers in special technopolymer
- Check valve made of stainless steel and is located in the delivery head
- Pump can not operate in dry conditions
- Pump body must remain completely submerged
- Working voltage: single-phase 230 V, three-phase 400 V. Other voltages available on request
.JPG)
Theta EX 4" Borehole Submersible Pumps with technoploymer internals.
ATEX Marking:
CE 0722 II 2G Ex eb h mb ob IIC T5 Gb
Max Flow 1.8m3/hr Max Head 210 m
Model: THETA EX
.JPG)
Croma EX 4" Borehole Submersible Pumps with technoploymer internals.
ATEX Marking:
CE 0722 II 2G Ex eb h mb ob IIC T5 Gb
Max Flow 3.6m3/hr Max Head 214 m
Model: CROMA EX
.JPG)
Gamma EX 4" Borehole Submersible Pumps with technoploymer internals.
ATEX Marking:
CE 0722 II 2G Ex eb h mb ob IIC T5 Gb
Max flow 6m3/hr Max Head 150 m
Model: GAMMA EX
.JPG)
Kappa EX 4" Borehole Submersible Pumps with technoploymer internals.
ATEX Marking:
CE 0722 II 2G Ex eb h mb ob IIC T5 Gb
Max Flow 7.2m3/hr Max Head 170 m
Model: KAPPA EX
.JPG)
Omega EX 4" Borehole Submersible Pumps with technoploymer internals.
ATEX Marking:
CE 0722 II 2G Ex eb h mb ob IIC T5 Gb
Max flow 10.8m3/hr Max Head 108 m
Model: OMEGA EX
.JPG)
Sigma EX 4" Borehole Submersible Pumps with technoploymer internals.
ATEX Marking:
CE 0722 II 2G Ex eb h mb ob IIC T5 Gb
Max flow 14.4m3/hr Max Head 84 m
Model: SIGMA EX
.JPG)
Iota EX 4" Borehole Submersible Pumps with technoploymer internals.
ATEX Marking:
CE 0722 II 2G Ex eb h mb ob IIC T5 Gb
Max Flow 24m3/hr Max Head 48m
Model: IOTA EX