Home > Hydrodif Pipe Fittings > MDPE Pipe Compression Fittings
(Details shown apply to the default selection)
Part Number: 713025
WRAS approved Hydrodif product for the PLAST Range of Fittings
Sizes from ∅25mm - 20mm to ∅63mm - 50mm available.
90º Reducing Tee for MDPE pipe comprising an acetal grip ring and Nitrile rubber O ring. They have a pressure rating of 16 bar at 20° C, and a maximum service temperature of 80° C (NB at reduced pressure). A competitive alternative to notable products such as Philmac, Plasson and Polyfast.
Customers who bought this item also bought:
Add to BasketMDPE 90º Elbow£2.21 - £82.04
MDPE 90º Reducing Elbows for MDPE pipe comprising an acetal grip ring and Nitrile rubber O ring.
Sizes from ∅25mm - 16mm.
Add to BasketPipe Liners£0.35 - £0.99
Pipe liners for MDPE pipe. They have a pressure rating of 16 bar at 20° C, and a maximum service temperature of 80° C (NB at reduced pressure).
Sizes from ∅20mm to ∅63mm
CERT NO. FS 668246
High Efficiency Pump System 6 inchCALL US: +44(0)1473 462046
In consideration of environmental relief and energy saving Franklin Electric developed a High Efficiency 6" Submersible Borehole System, consisting of a synchronous submersible NEMA motor associated variable frequency drive and output filter.
Water Supply & Control Well Rehabilitation Hydrodif Fittings Well Inspection Export Services All Products
Delivery Information Returns Terms & Conditions About Us Media Centre
Geoquip Water Solutions Ltd Unit 7, Sovereign Centre Farthing Road Ind Est. Ipswich, Suffolk, UK IP1 5AP Tel: +44(0)1473 462 046 firstname.lastname@example.org
We accept all major credit & debit card Follow us on Twitter @geoquip @hydrodifuk
Go Top | Site Map | Contact Us
© 2018 Geoquip Water Solutions Ltd (4483856). Hydrodif Products Ltd (3866958) | We are accredited to ISO 9001:2015 Cert No: FS 668246 ® The Hydrodif name and Hydrodif Logo are the Registered Trade Marks of Hydrodif Products Ltd under Registration Numbers 014 903 694 & 014 093 652