Home > Hydrodif Pipe Fittings > MDPE Pipe Compression Fittings
(Details shown apply to the default selection)
Part Number: 714050
WRAS approved Hydrodif product for the PLAST Range of Fittings
Sizes from ∅50mm to ∅110mm
Compression Flanges for MDPE pipe comprising an acetal grip ring and Nitrile rubber O ring. They have a pressure rating of 16 bar at 20° C, and a maximum service temperature of 80° C (NB at reduced pressure). A competitive alternative to notable products such as Philmac, Plasson and Polyfast.
Add to BasketMDPE 90º Elbow£2.21 - £82.04
MDPE 90º Reducing Elbows for MDPE pipe comprising an acetal grip ring and Nitrile rubber O ring.
Sizes from ∅25mm - 16mm.
Add to BasketMDPE Couplers£2.16 - £64.21
MDPE Straight coupler for MDPE pipe comprising an acetal grip ring and Nitrile rubber O ring.
Sizes from ∅16mm to ∅110.
Add to BasketPipe Liners£0.35 - £0.99
Pipe liners for MDPE pipe. They have a pressure rating of 16 bar at 20° C, and a maximum service temperature of 80° C (NB at reduced pressure).
Sizes from ∅20mm to ∅63mm
CERT NO. FS 668246
NEW
High Efficiency Pump System 6 inchCALL US: +44(0)1473 462046
In consideration of environmental relief and energy saving Franklin Electric E-tech developed a High Efficiency 6" Submersible Borehole System, consisting of a synchronous submersible NEMA motor associated variable frequency drive and output filter.
