Speed Submersible Drainer Pump

RANGE OF PERFORMANCE

Flow rate up to 400 l/min (24 m 3 /h) Head up to 14.5 m

LIMITS OF USE

• Depth up to 5 metres (3 metres up to 0.55 kW)
• Liquid temperature up to + 40°C (+90°C for a maximum period of 3 minutes)
• Passage of solid bodies up to Ø 10 mm
• Drainage level: 14 mm from the bottom for SPEED 30-50-70M 30 mm from the bottom for SPEED 100-125M

STANDARD FEATURES:

SPEED 30-50-70 M (single-phase)

• Float switch.
• Hosetail.
• Power cable in neoprene “H05RN-F” length 5 metres with Schuko plug.

INSTALLATION AND USE THE SPEED SERIES IS SUITABLE FOR DRAINING CLEAR WATER WITHOUT ABRASIVE PARTICLES. THE CONSTRUCTION GUARANTEES SIMPLE AND SAFE OPERATION DUE TO THE COMPLETE COOL - ING OF THE MOTOR BY THE PUMPED WATER AND THE DOUBLE SEAL DESIGN. THEY ARE RECOMMENDED FOR EMERGENCY DRAINING OF SMALL FLOODED AREAS (ROOMS, CELLARS, GARAGES), FOR THE DISPOSAL OF WASTE WATER IN THE HOME (DISHWASHER, WASHING MACHINE) AND FOR EMPTYING DRAINAGE TRAPS.

*Clearance stock – subject to reduced warranty period.

CONSTRUCTION CHARACTERISTICS

• DELIVERY BODY: glass filled technopolymer , particularly resistant to impact and corrosion, with threaded port ISO 228/1.
• SUCTION GRID : technopolymer .
• IMPELLER: open type in technopolymer .
• MOTOR SUPPORT: stainless steel AISI 304 .
• MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104 .
• DOUBLE SEAL: mechanical seal ceramic -graphite - NBR , with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
• MOTOR: submersible asynchronous single-phase for continuous duty.
• SPEED M: single-phase 110V
• INSULATION: class F.
• PROTECTION: IP 68