Geoquip Water SolutionsWater Solution Specialists

Smart PRO 1 / 2 Electronic Control Panel

CALL US: +44(0)1473 462046
Part Number

SMART PRO 1 Electronic Control Panel
SMART PRO 2 Electronic Control Panel

Please contact us if you would like any technical advice or price and availability information.


SMART PRO 1 / 2 is the evolution of SMART EVO control panel, suitable for both clean water and wastewater systems. Thanks to the new expansion modules system and the connections, the panel can be used for a wide range of applications and increases the potential of the system. Compact, very easy to install and program also by App, it facilitates the replacement of old and obsolete panels installed.

  • Easy to set up
  • Anti-Seize - Pump unblocking function to prevent faults
  • Maximum Control - Integrating the most complete system protections

Suitable with Franklin Electric E-tech pumps and motors


  • Pressurisation
  • Filling
  • Emptying
  • Drainage


  • BMS Free voltage contacts module
  • Bluetooth WI-FI module for App
  • Water in oil chamber module
  • Buffer battery module
  • RS485 modbus module (optional)
  • Level probes module 
  • Removable terminals
  • Modular Expandability



  • LEDs on front of panel for signaling operating status and alarms
  • AUTOMATIC - 0 (standby) - MANUAL pushbuttons (fixed or pulse)
  • Anti-seize autotest (can be disabled)
  • Dry running protection with: level probes/ floats/ pressure switches
  • Up to 4 control inputs: floats/pressure switches
  • Clicson inputs with automatic reset (can be disabled)
  • Inversion of inputs (from normally open to normally closed)
  • Start/stop float switch function (can be disabled)
  • Current protection delay
  • Automatic reset from minimum current alarm (can be disabled)
  • Delay time of motor enabling after power mains return
  • Pushbutton for manual operation (fixed or pulse)
  • Predispositio for run capacitors for single-phase version (not included)


  • Power supply 1phase 100-240Vac 50/60Hz
  • Power supply 3phase 310-450Vac 50/60Hz


  • Electronic control of maximum current with assisted calibration
  • Electronic control of minimum current (dry running) with assisted calibration
  • Failure or incorrect phase sequence control on power supply input (can be disabled)


  • Alarms reported: voltage status, levels, motor overload, minimum motor current, clicson motor
  • General alarm output contacts


  • Auxiliary and motor protection fuses
  • Isolator (except for NB code)
  • Box in ABS, IP55

Additional Functions SMART PRO 2

  • Duty/standby (can be disabled)
  • Immediate motor changeover in case of a fault

Downloads & Videos
Quote Required?
Please state part number and specifications where applicable.
Would you like to sign up to our newsletters?
You will receive emails on our latest news, products and services, please see our privacy policy for more information.
Please add the two numbers