Control Panel Accessories

Level sensors 1 electrode with and without cable
 

Motor Capacitor
 

Electronic pressure transmitter with cable
 

Indoor or outdoor flashing light beacon red, amber or blue.
 

These electrical piezometers are used for water pressure measurements of saturated soils, boreholes, reservoirs and wherever it is necessary to achieve precise and fast measurements.

Low level probe pump control is designed to monitor the slow ingress of water into a sump and automatically start and stop a sump or mop pump.
 

Bulb float with three watertight chambers level regulator with freely suspended trim variation.
Unlike traditional floats that float on the water surface, the Bulb Float with its special construction with integrated counterweight, remains underwater.
 

Float switch suitable for water pumps and professional plumbing systems automation.
 

T-KIT Plus Stainless steel 5-ways BSP fitting with inner non-return valve.
3 sizes available 1", 1 1/4" & 1 1/2"

Electromechanical pressure switches, types. PS2, FSG and FYG for power circuits. They are used to control pressure  of water up to 10.5 bar.
 

Heat Shrink Joint Kits

Thermal Heat Shrink Joint Kit - 1.5 > 6mm (Extra long sheath 300mm)

SWITCHMATIC 2 is an electronic pressure switch with an integrated digital pressure gauge. It can manage the start and stop of single-phase electric pumps up to 3 HP (2,2 Kw)

SWITCHMATIC 1 is an electronic pressure switch with an integrated digital pressure gauge. It can manage the start and stop of single-phase electric pumps up to 3 HP (2,2 Kw)

SWITCHMATIC 3 is an Electronic pressure switch with integrated digital pressure gauge. Its dry contact output is ideal for transmitting an open/close signal to an external control panel.

Simple battery powered pulse counter and hours run meter.

FLASH SALE
 

T-KIT Switchmatic is an electronic pressure switch integrated in a 3-ways fitting with a digital pressure gauge. 

3 way fitting with inner non-return valve and pressure gauge. It has G¼" female thread where it can be mounted to a pressure switch.