Multi-jet turbine water meter type MST are recommended for use in case of high consumptions and where piping, through deteriorsation, releases solid particles.
These are recommended in applications where the water contains suspended solids with dimensions up to ø 50 mm. Their use is recommended for drying flooded areas such as cellars, underground car parks, domestic drains and for emptying cesspits or sewage disposal.
Flow rate up to 500 l/min (30 m 3 /h) Head up to 15 m
Designed for draining clear or slightly dirty water with small solids, they are recommended for domestic, civil and professional use, for draining flooded areas such as cellars and garages or for emptying swimming pools or tanks and for disposing of non-sewage waste water.
Flow rate up to 400 l/min (24 m 3 /h) Head up to 27 m
They are recommended for pumping clean water with a sand content no higher than 50 g/m3. Their high efficiency and reliability makes them suitable for supplying domestic water from tanks, reservoirs or relatively deep wells, drawing rainwater from cisterns, watering by hand or feeding.
They are recommended for emergency draining of small flooded areas (rooms, cellars, garages), for the disposal of waste water in the home (dishwasher, washing machine) and for emptying drainage traps.
Flow rate up to 400 l/min (24 m3/h) Head up to 14.5 m
Designed for draining larger solids, they are recommended for building or industrial use, ideal for sewage, waste and ground water, even with solids or mud. Also large areas like car parks.
Flow rate up to 1600 l/min (96 m3/h) Head up to 24 m
Franklin Electric E-Tech EHsp Horizontal Self-Priming Multistage pump is WRAS approved and features a design innovation of a special elastic valve system allowing air, present in the system, to escape - suction height up to 7 meters in less than 5 minutes.
